1 18

AlgoForce

ALGOFORCE E1500 [READY PACK]

ALGOFORCE E1500 [READY PACK]

$3,083.00 AUD
$3,083.00 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
COIL
BATTERY
AUDIO
NOTIFY ME WHEN BACK IN STOCK

AlgoForce E1500 Highlights:

The AlgoForce E1500 is designed and assembled in Australia, using patented Ultra-Fine Pulse Induction technology. Super stable in highly mineralised ground, with little to no interference even under power lines or in suburbia, with unique target ID on the screen and many coil options!

The AlgoForce E1500 is undisputedly in a league of its own as the most affordable Pulse Induction Gold Detector. Read on to learn more!

*NEW Version with Aluminium Arm Cuff and refined shaft (does not twist in use)*

View full details

WATCH THE VIDEO

PULSE INDUCTION

The AlgoForce E1500 is a pulse induction metal detector that excels at locating very small gold nuggets in often complex mineralised soils found in most goldfields. Developed in Australia by AlgoForce Pty Ltd, it harnesses patented Ultra-Fine pulse induction technology, which is capable of detecting even the tiniest of gold nuggets. The E-1500 has the sensitivity of a VLF gold detector yet with the punching power of a PI meaning it can handle very mineralised soils.

TARGET IDENTIFICATION

Traditionally, Pulse Induction metal detectors do not provide target ID, a number on the screen giving you an idea of what the item is before you dig it... however that has changed with the AlgoForce E1500. By using the pin point button you can scan over your target to get a target ID.

What's most interesting and exciting is that early users of the Algo Force have reported consistent target ID's for lead shot, the most common target found in the search for gold, that historically has been indistinguishable from small gold nuggets! We were sceptical but the Detect-Ed team put it to the test, and after 4 days in the Victorian goldfields with the E1500, we can confirm - it's true.

LOW WEIGHT + COMPACT

The AlgoForce E1500 is The Lowest weight Pulse Induction Gold Detector on the market. Weighing in at 820g, and less than 2kg when setup with a smaller coil and battery pack (as pictured). The E1500 is a detector anyone can comfortably swing for many hours.

The AlgoForce E1500 sports a fully carbon fibre shaft that telescopes down for storage and travel, and for close quarters detecting (as pictured). If you're scanning the side wall of a gulley, it's super handy to be able to shorten the detector and comfortably switch from scanning to digging.

MANY COIL OPTIONS

Never before has there been so many coil options for a detector! The E1500 is compatible with any of the extensive list of 5 Pin (GP/SD/GPX) Mono Coils (Excluding GPX6000 Coils). Meaning there's SO many coils in production for it, most notably Coiltek and Nugget Finder Coils plus decades of additional compatible options. The AlgoForce can use any of the coils made for the GPX4500 & GPX5000 for example.

For a new detector to launch into the market with so many coil options available from the get-go, it's very exciting to think prospectors can take their pick (pun intended) and get out there with their preferred setup for their application.

KEY FEATURES

  • LOW WEIGHT

    The E1500 is the lowest weight PI gold detector currently available. Featuring a carbon fibre shaft, the E1500 easily comes in at under 2kg when using a smaller coil and battery pack.

  • PULSE INDUCTION

    Powerful Patented "Ultra-Fine Pulse Induction" Technology. Incredibly stable on mineralised soils and EXTREMELY sensitive to gold nuggets, plus a new beach mode for wet sand hunting.

  • EXTREME EMI RESISTANCE

    Unlike other Pulse Induction Detectors the AlgoForce can be used under power lines and close to suburbia with little to no interference, opening up many new and untouched sites!

  • TELESCOPIC SHAFT

    Adjust the detector to your ideal length and easily collapse it for scanning gully side walls, for easy storage, travel, or hiking to your favourite spot! Just 150cm from arm rest to coil connector.

  • TARGET IDENTIFICATION

    Learn about what you're detecting, before you dig it. The AlgoForce presents a unique feature with numbers on screen to help you dig less lead shot, and more gold in the goldfields.

  • 2 YEARS AUSTRALIAN WARRANTY

    Fully supported by the manufacturers Australian presence, simply contact your dealer should you require any after sales support or warranty help with your AlgoForce E1500 Metal Detector.

1 6

E1500 FEATURE LIST

Patented Ultra-Fine pulse induction technology for detecting small gold nuggets

3-piece Carbon Fibre stem for compact pack down

Powered by any portable USB power bank (not included) 

Patented technology for ambient sound awareness in headphone mode

Wide sensitivity range

Stable conductive target ID (0-99) in pinpoint mode even in highly mineralised soils

Dual ground balanced detection channels for different sized nuggets

Four detection modes - Ultra-Fine, Fine, Normal, Large (Salt)

Lightweight (820g without coil or powerbank)

Compatible with all 5-pin SD/GP/GPX series compatible mono coils*

Coil optimisation function, with up to five coil save slots

Auto or Manual Frequncy Scan also known as noise cancel.

Auto Ground Balance reset, the bars fill up when it's time to ground balance

Real time scrolling signal display

Independant threshold, tone and volume levels

Adjustable Backlight super easy to see screen, even in harsh sun.

Battery Life of 20-30 Hours with the Detect-Ed 20,000mAh battery pack

WHAT'S IN THE BOX?

1. AlgoForce E1500 Control Box & Handle

2. Carbon Fibre Shaft (3 Piece) with Stand.

3. Canvas Carry Bag

4. Armrest with Thumb Screws

5. 2 x Arm Straps (1 Standard, 1 Long)

6. Coil Cable Straps

7. Powerbank Straps x 2

8. USB-C to USB-A Cable 

9. Quick Start Guide

The AlgoForce E1500 Basic Package does not include either a coil or a power bank. You can add extra parts at the top of the page.

FREQUENTLY ASKED QUESTIONS

IS THE ALGOFORCE E1500 AUSTRALIAN?

Yes, the Algoforce E1500 Pulse Induction Metal Detector is designed & assembled in Australia by ALGOFORCE PTY LTD.

WHICH COILS CAN I USE WITH THE ALGOFORCE E1500?

You can use any of the Mono GP / SD / GPX* Coils (Also referred to as Legacy Coils) with a 5-Pin Connector. *Excludes GPX 6000 Coils.

DO I NEED TO USE A BATTERY PACK WITH THE E1500?

Yes, The AlgoForce E1500 does not contain a battery in the control pod, therefore you must plug in an external battery pack (sold seperately) which can be mounted under the arm rest with the straps provided. You can use any USB power bank with the AlgoForce.

HOW DOES THE E1500 HANDLE MINERALISED GROUND?

By using Pulse Induction, the E1500 is very stable in highly mineralised ground (often referred to as "Hot Ground") and can run stably in many environments where VLF detectors would be completely overwhelmed.

On the topic of stability, from our testing, the Algo Force can also be used in suburban areas, under poerlines and even in doors! This is incredible news as it will open up so many new spots around the country where Pulse Inductions have not previously been able to operate!

DO I NEED TO UPDATE THE E1500 WITH THE LATEST SOFTWARE VERSION?

The team here at Detect-Ed Australia constantly ensure that all of our metal detecting stock is fully updated whenever a new software version is released for any product, meaning you get the most up to date gear when you buy from us. 

You don't need to keep your detector fully updated in order to use it. Any software updates that launch are optional, adding, improving or tweaking features.

You can find the lastest software versions, along with instructions on how to update your E1500 by AlgoForce on the Downloads Page.

If you'd like us to update your metal detector for you, simply get in contact with our friendly team and we'll be happy to help.